Automatic aluminum frame spacer bar bending machine
Production Overview of aluminum frame spacer bending machine
Insulated glass is made by 2pcs or more float glasses which filled with desiccant of Argon gas with Aluminum frame.Primary seal(butyl)between insulating glass and Aluminum frame, secondry seal(polysulfide or structure). Insulating glass will be effectively protect radiation when coated Low-E film.Automatic Aluminum frame spacer bending machine is a special equipment for making aluminum frames of insulated glass, which replaces the traditional fabrication technology. Automatic Aluminum spacer bending machine can make a variety of convex polygonal aluminum frames by one aluminum strip in one time, thus strengthening the strength of the aluminum frame, making the sealing effect of the insulating glass more better.
Detail of Automatic spacer bending machine
1.Automatic Aluminum frame spacer bending machine set up four groups of spacers storage units, Aluminum bar with multiple sizes can be selected at will.
2.Automaticlly continuous connection of spacer,cutting spacer,avoidance of spacer bar joint
3.Heavy duty connectors ,convenience and safety for installation and debugging
4.Adopt the Siemens 1200PLC control feeding system with fast working speed.spacer frame size can be adjusted with an accuacy of 0.1mm/m/
5. Aluminum spacers are available in different specifications and in sizes of 5.5-26.5mm
6.No material prompt,sleep prompt,fault prompt,work prompt,unreasonable data refuse processingand prompt
7.Spare parts of all machine have ID codes.
8.Suppprt art-shaped aluminum frame and special-shaped aluminum frame bending
9.CNC bending angle control system with adjustable accuracy of 0.1°
10.Automatic spacer bending machine can bend aluminum spacer /technoform /Alupro /swisspacer/ stainless steel /thermix (optional)
11.USB input function ,it can read the excel data directly
12.Printing paper label sticker function (Optional),could remove it easily.
Technical parameter of Automatic spacer frame bending machine
| Max. bending size | 2000mm*2000mm |
| Min. bending size | 250mm*180mm |
| Aluminum spacer width | 6A - 27A |
| Spacers racks | 4 Racks |
| Spacer size error | ±0.5mm |
| Angle error | ±1° |
| Processing speed | < 25s (1000mm*1000mm) |
| Air supply | ≥0.65MPa |
| Voltage | 380V50Hz 3P |
| Total power | 2.5KW |
| Dimension | 10500mm*2200mm*2600mm
|
Main Features of Aluminum spacer bending machine
1.automaticlly Bending and cuttingavoid the connection, the roundness,auto matically cut after bending.
2.Automatic spacer bending machine can make triangle ,rectangle,positive five squareness,positive hexagon,roundness shap and so on.
3.PLC control, touch screen simple operation.Siemens 1200 PLC control system with fast working speed
4.Pause and Reset device for handling equipment failures
5.Four material strage slots for four different specifications of spacers.
6.Automatic spacer frame bending machine can Bend aluminum spacer, smooth stainless steel, warm spacer,Automatically avoid the pins while bending and cutting
7.Bending shape frame. Using circle wheel device to bend circle frame or frame with circle corners. Min R60, Max R150, spacer sizes: 5.5-26.5mm). Different sizes of aluminum bars require different size tools
Related Product
1.Sealant-spreading Machine LJST02A
Main feature
• Imported motor system to improve equipment efficiency
• Imported sealant gun,stainless steel mixer
• High pressure protect device
• Anti-back flow control structure
• Mixed rate detector can control the rate of two kinds of glue
Technical data
| Working air pressure | 0.3-0.6MPa |
| Sealant spreading pressure | 15-20MPa |
| Sealant volume | 4L/min |
| Diameter of A/B sealant | 570mm/280mm |
| Sealant spreading air pressure ratio | 50:1 |
| Mixed rate | 6:1-14:1 |
| Air supply | Flow 0.8m3/min |
| Air pressure | ≥0.8MPa |
| Overall dimension | 1100*950*1630mm |
2.Rotated Sealant Spreading Table LJSK02
Main feature
• Easy operating, simple and flexible
• It is used for fixing and rotating glass when manual coating the outside of IG glass
• The middle sucker is suitable for small pieces of glass,however,extra support frame is for large pieces of glass
Technical data
| Power supply | 380V 50Hz |
| Total power | 0.37kw |
| Operating dimension | 1500*1500mm |
| Dimension | 600*550*985mm |
3.Smart Vertical Edge Deleting Machine LJCM2545
Main feature
• Two-way glass access
• Automatically measure size
• Automatically distinguish low-e surface
• The head can be rotated 360°
• Safe and full automatic device
• PLC control system, touch screen interface
• Six servos control system
• Edge deletion is adjustable
• Intelligent control system, can recognize batch processing
Technical data
| Max. glass processing size | 2500*4500mm |
| Min. glass processing size | 400*280mm |
| Glass thickness | 3-15mm |
| Diameter of grinding wheel | 200mm |
| Conveyor height | 500mm |
| Edge deleting width | 10-50mm |
| Transmission speed | 1. 29m/min |
| Edge deleting speed | 2-29m/min |
| Abrasive wheel width | 10/12/15mm |
| Glass thickness | 3 - 15mm |
| Grinding wheel speed | 0~3000r/min |
| Total air consumption | 100L/ min |
| Air pressure | ≥0.8MPa |
| Total power | 3P 380V 50Hz 3.35KW |
| Dimension | Dimensions :9700×2500×3400mm |
| Total weight | 3700KG |
Electrical parameters
| NAME | ORIGIN | BRAND |
| Servo motor | Taiwan | TAIDA |
| PLC | Taiwan | TAIDA |
| Pneumatic component | Taiwan | AAIRTAC |
| Low pressure electricity | Germany | SIEMENS |
| Circuit breaker | Germany | SIEMENS |
| Sensor switch | Korea | AUTONICS |
| Approach switch | Korea | AUTONICS |
| Limit switch | Taiwan | TEND |
| Connector | Germany | SIEMENS |
| Frequency converter | France | SCHNEIDER |
| Main Button | France | SCHNEIDER |
| Intermediate relay | Japan | OMRON |
3.Butyl Extruder Machine LJTB 01
Main feature
• PLC control system, touch screen interface
• Automatically identify the width of aluminum bar, the glue nuzzle can be automatic adjust
• The critical part of the hydraulic system using German imports of components to ensure that the plastic evenly full
• Fast preheat, improve work efficiency
• with preheating function
• With exhaust inflatable function, improve the quality of sealing and save time for plastic
• Quickly coating speed,can up to 47m/min
• Saving the amount of glue
Technical data
| Squeeze pressure | 10-18MPa |
| Temperature | 110~140℃ |
| Aluminum spacer width | 6A - 27A |
| Speed | 5-47m/min |
| Diameter of butyl cylinder | 200mm |
| Air supply | 0.4m³/min |
| Air pressure | ≥0.6MPa |
| Total power | 380V, 5.7KW,50HZ |
| Dimension | 2800×700×900mm(L×W×H) |
| weight | 650kg |
Electrical parameters
| Name | Original | Brand |
| PLC | China | KINCO |
| Valve | German | HAWE |
| Low voltage electrical apparatus | German | SIEMENS |
| Hydraulic and pneumatic supercharging system | German | MAXIMATOR |
| Frequency converter | China | KINCO |
| Pneumatic components | Taiwan | ARTAC |
| Quick exhaust valve/Vacuum generator | Japan SMC | SMC |
| Travel light | Japan | OMRON |
| Optical fiber | Japan | OMRON |
Product Tags:
|
|
150*300mm Spacer Bar Bending Machine Profile Bending Machine Images
|
